FS M6500 Series, Configuration Manual

Page: 119 / 185

M6500 Series NE Configuration Manual
118
The Source Access Identifier and Destination Access Identifier values in the TTI overhead can be either default or
arbitrary strings.
6.3. Configuration Examples
Application Environment
：
Figure6-19 Application Environment of SM/PM Overhead Configuration
Configuration analysis: The network elements of the local-end and opposite-end client side signals should be
configured with the same service, such as XGE_GFPF service (Specific configuration needs to be made
according to actual needs). The capacity of the local-end and opposite-end client side signals is ODU2.The OTU2
service is configured on both ends of the line side (configure according to the service type of the client side),
and both ends are demultiplexed to ODU2.
According to the SM overhead configuration rules described in 6.1.2, the SM overhead is planned as follows: