M6500 Series NE Configuration Manual
19
1.
Users can only add line-card in the slots in available state.
2. Users can only delete line-card whose slot status is absent.
2.5. NE IP Address Management
There are three types of NE IP address:
Name
Description
Note
Node IP address
In-band management IP address
Suitable for DCN transmission
IP1/IP2 address
Out-band management IP address
Can be modified by the client
Local NMS IP address
default IP address, 192.168.126.2
Use of DCN: The NMS system of the transmission products will manage thousands of network elements in most
cases. Using this technology, all network elements can be managed by one or several access network elements.
2.5.1. Node IP Configuration
Steps:
1. Click on the NE which has been added;
2. Click on“
MGMT IP Configuration
”on the right;
Figure2-12 Manage IP Configuration
3. Input the node IP address in the“
Add NE
”module,
4. Click on“
Apply
”to save the configuration.
Summary of Contents for M6500 Series
