FS M6500 Series, Configuration Manual

Page: 166 / 185

M6500 Series NE Configuration Manual
165
become trustworthy and the running time counts again from 0. The last 24-hour data automatically becomes
the history data, as shown in the figure below:
Figure9-56 24-Hour Ethernet Monitoring Data
9.2.6.3. Ethernet Monitoring Data Reset
When the current Ethernet monitoring data needs to be reset and to restart the monitoring, the 15-minute and
24-hour operation steps are the same. Taking 15-minute operation as an example, you can click on Reset
behind each piece of monitoring record to perform resetting of a single piece of monitoring record, or you can
select the first box to do batch resetting, as shown in the figure below:
Figure9-57 Ethernet Reset
Then click on Apply button, as shown in the figure, it will show that the operation is successful. After that, click
on
Refresh
button to refresh the whole page. At this time, the suspicious interval marker will become from
untrustworthy to trustworthy and the running time counts again from 0. All the data is updated to the latest
time to read the value.
Figure9-58 Ethernet Successfully Reset
9.2.6.4. Ethernet Monitoring Data Shown As NA
Here are the situations when the Ethernet for the port is shown as NA:
(1) When optical module is not inserted into the port, the optical module is not in position but the port is
enabled.
(2) The port and the module are normal and the port is enabled.
(3) Optical module is inserted into the port but it is mismatched and the port is enabled.
At this time, all the data will be shown as NA. The suspicious interval marker is trustworthy (after 900/86400
seconds) or untrustworthy. The running time is normal and counts from 0, as shown in the figure below: