FS M6500 Series, Configuration Manual

Page: 50 / 185

M6500 Series NE Configuration Manual
49
Figure4-10 M6500-TMXP2 Client Side-Select Port Mode
Select “Enable” in the management status bar to enable the port, as shown in the figure below:
Figure4-11 Enable M6500-TMXP2 Client Side Port
4.4.1.1. Interface Configuration
Select NE-Slot 1, click on“ Port1 ” and select“ Port Management ”on the right, the port management interface
shows up.Select the interface options of the“
Port Configuration
”module, the information such as management
status, the near-end no light laser shutdown (ALS), turn off light while alarm occurs, loop-back, patch trace
mismatch (TIM) mode can be modified in the toolbar interface.