FS M6500 Series, Configuration Manual

Page: 173 / 185

M6500 Series NE Configuration Manual
172
Figure9-73 Successfully Export Data of OCh
9.3.3. FEC History Performance Statistics
9.3.3.1. FEC History Monitoring Parameters Introduction
The monitoring parameter of the history monitoring point for FEC includes time interval, which is a shortcut to
choose the time. There are three options--one day, three days and a week for you to choose.
Duration: You can choose a specific day or a period of time according to your needs.
Performance Monitoring Point: entrance-near end.
Performance Monitoring Parameters: maximum error correction rate and average error correction rate.
Figure9-74 FEC History Performance Parameters
9.3.3.2. View FEC History Monitoring Information
15minutes and 24hours of FEC history data operation and display are the same form. Here we take 15-minute
FEC history monitoring point as an example. Choose the appropriate network elements, slots, ports and
monitoring cycles through the screening box above the menu, and then select the time interval, performance
monitoring point and parameters which need to be monitored in the right menu.Parameters to be monitored
can be all selected or only select one or two of them to check.After that, click Apply button on the lower right
corner. From the graph, we can see the trend of the refraction chart of the monitoring parameters. The ordinate
represents the value of the monitoring data, and the abscissa represents the time. Data which has been read for
more than 15 minutes will be automatically transferred from current statistics to history statistics.