background image

1                                                                                                                                           2 

 

 

RT-650 VHF Marine Radio 

With Wireless Accessory Microphone 

With Integrated AIS Receiver  

 

Owner’s Manual

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

OPERATOR WARNING 
 

Navicom requires the radio operator to meet the requirements for Radio 
Frequency Exposure. Unauthorized changes or modifications to this 
equipment may void compliance with ETSI Rule. Any changes or 
modifications must be approved in writing by Navicom. 

 
This equipment has been tested and licensed to comply with the limits for Class D 
Digital Marine Devices. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment can generate 
or radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications and human 
body. Never transmit before you make sure the antenna is properly installed.  
 
This device is only an aid to navigation. Its performance can be affected by many 
factors including equipment failure or defects, environmental condition and improper 
handling or use. It is the user's responsibility to exercise common prudence and 
navigational judgment, and this device should not be relied upon as a substitute for 
such prudence and judgment. Your Navicom VHF radio generates and radiates radio 
frequency (RF) electromagnetic energy (EME). This equipment must be installed and 
operated in accordance with the instructions contained in this handbook. Failure to do 
so can result in personal injury and/or product malfunction.

  

 
 
 
 
 
 
 
 
 
 

Summary of Contents for RT-650

































Reviews: