NAVICOM RT-650, Owner'S Manual, Page: 13 / 32

25 26
5.2.4 MAKE A ROUTINE CALL (INDIVIDUAL)
You can make an individual call, either to a ship or to a boast station.
5.2.4.1 MANUALLY SENDING AN INDIVIDUAL CALL
1) Press DSC /MENU to DSC mode, then select “NEW CALL”. Press the
CH knob The arrow is pointing to <ROUTINE>
2) Rotate the CH knob to select: SAFETY, press the CH knob the arrow
is pointing to <MANUAL>
3) Press the CH knob again access manual enter ID screen, enter the
MMSI number using the CH knob, when MMSI entry is complete,
press the CH knob to accept the selection
4) Then rotate the C H knob to select the working channel and press the
CH knob to accept select.
(Only in the case of a call to a ship, it is permitted to enter a talk channel;
a call to a coast station, the coast station will specify the channel to talk
on in its acknowledgement.)
5) The radio summarizes the call details and asks for confirmation to
send the call (send?).
6) Press the CH knob again to send the call. The radio goes to CH 70
and the icon-T is displayed on the screen while the DSC call is being
sent, then LCD display an awaiting acknowledgment.
7) If the call is acknowledged (ACK), press PTT to talk
8) If the call does not get with in 30 seconds, the radio prompts you to
resend the call.
9) If you do nothing for 5 minutes, the individual call cancelled and the
radio revert to the original channel.
5.2.4.2 SENDING AN INDIVIDUAL CALL (MMSI STROED IN BUDDY LIST)
1) Press DSC /MENU to DSC mode, then select “NEW CALL”. And next
select one of categories from new call menu. Press the CH knob, the
arrow is pointing to <MANUAL>
2) Rotate the CH knob select the person of the Buddy list that you want
to call. The procedures are as same as manual send an individual call.
5.2.4.3 ACKNOWLEDGEMENT OF AN INDIVIDUAL INCOMING CALL
The EUR requires the operator to manually send an acknowledgement to the
requesting radio. Press
CH knob to send an acknowledgement or CANCEL
button to cancel.
The USA will automatically send an acknowledgement to the requesting radio
within 10 seconds of receiving the call.
5.2.5 LAST CALL (RECALL THE MOST RECENT INCOMING CALL)
This facility also is useful and is used frequently as routing individual call
1) Press the DSC / Menu button to enter the DSC mode LAST CALL will be
pointed, press CH knob to display the detail information of the last call
2) Select the working channel for individual call and press CH knob, the radio
summarizes the call details and ask for confirmation to send the call
(send?). Press
CH knob to send the call other operation as same as the
section 5.2.4.1
5.2.6 SEND CALL USING THE CALL LOG
The CALL LOG contains the contact details for the 20 most recent incoming
calls, so you call any of them again quickly
1) Press the DSC / Menu button to enter the DSC mode, select CALL LOG ,
Rotate the CH button to scroll for previous call.
2) Press the CH knob to conform the choice then follow the as the ways to
make the call in 5.2.4.1
3) You can choose SAVE MMSI to store the vessel MMSI from the call log
5.2.7 SEND CALL USING THE DISTRESS LOG
Total max.10 distress call data could be stored; the oldest one will be erased.
The feature is similar to CALL LOG function, but selects the caller from the
Distress Log.
DSC CALL
LAST CALL
>NEW CALL
GROUP INDIVIDUAL
><MANUAL> NEW CALL
ROUTINE
> SAFETY
URGENCY
450078964
INDIVIDUAL
SAFETY
WAITING ACK 450078964
SEND AGAIN
>YES
NO PILOTAGE
21º22.0012N
120º40.1001E
10:15 UTC
450078964
INDIVIDUAL
SAFETY
>SEND? 450078964
INDIVIDUAL
SAFETY
>SET CHANNEL MANUAL IND
0- - - - - - - -