NAVICOM RT-650, Owner'S Manual, Page: 5 / 32

9 10
⑥
DSC / Menu Use this knob to enter DSC Call Menu or Setup Menu
Press to enter DSC Menu, and Hold down to enter the
Radio Setup Menu
⑦
HI/LO / MEMO Press button to toggle between 25 watt and 1 watt
output. “ ” or “ ” icon appears on LCD display to
indicate setting
Hold the button to select memory channels mode.
⑧
SCAN Start and stop normal or priority scan and memory
channels or priority channels scan.
⑨
WATCH Start or Stop dual watch or tri-watch,
⑩
16 Press button to access channel 16 quickly
Press button to quit all other modes and to into the
priority channel
11
DISTRESS This button is used to send a signal of distress in case of
emergency. See DSC Operation for details of sending
the call. This button is cover by a spring cover.
NOTE: The Distress Function or any other transmitted
DSC function does not work unless a user’s MMSI has
been entered.
12
LCD Large LCD ( 39mmx39mm ) with viewable area of graph dot
matrix makes it easy to be read.
13
Built-in Speaker Guarantee a clear ring and voice communication
2.2 BASE STATION (REAR)
①
Antenna Socket Connect a suitable antenna to your marine VHF radio
to get a satisfying communication.
②
Power Source Connect the radio to a 13.8 VDC power source.
③ External Speaker
Jack
If need be, you can also use this cable to connect an
external speaker.
④
External Connector Connect the radio to a GPS receiver, and output AIS
data to PC or plotter
2.3 Wired HANDSET