NAVICOM RT-650, Owner'S Manual

Page: 20 / 32

39 40
6.9.2.1 ENTER YOUR GROUPS
1) Select GROUP SETUP and the cursor is at <MANUAL NEW>. If an
existing names & MMSI data are stored, the values appear.
2) If is blank, Only MANUAL NEW appear on LCD
3) The entry procedures are same as that of the BUDDY LIST.
6.9.2.2 EDIT USER GROUPS
1) Select DSC SET/UP then GROUP SETUP and press the CH knob.
The existing names & MMSI data are displayed on screen. Select the
Group name or, only the MMSI that you wanted
2) Press
the CH knob to edit.. The entry procedures are same as that
of the BUDDY LIST
3) when the edition is finish press the
CH knob to store the changes
and return to the GROUP MMSI screen.
6.9.2.3 DELETE A GROUP
1) Select GROUP SETUP and press the CH knob. The existing group
names are displayed on screen
2) Select that you wanted delete and press the
CH knob will display
EDIT or DELETE item
3) Select DELETE and press the
CH knob will display DELETE
GROUP menu arrow point the YES, then press the CH knob to empty
the group and return to the GROUP SETUP screen. The LCD displays
the group as follow.
6.9.3 ENTER YOUR ATIS MMSI
This is a once-only operation.
You must enter your ATIS MMSI first then you can access the ATIS functions.
1) Select DSC SETUP then ATIS MMSI and press the CH knob. If an
existing MMSI is stored, the values appear.
2) If the MMSI is blank, a dashes line appear, except for the initial ’9’
Enter ATIS MMSI along the dashed line. Press the
CH knob to confirm
each correct entry to move to the next digit.
If your make an error, press –until < appears, then press the
CH knob
to backup and correct the entry.
3) Hold the CH knob to store your ATIS MMSI.
4) Enter your ATIS MMSI again as a password check, hold the CH knob
to permanently store the your ATIS MMSI and return to the menu.
5) You can view your stored ATIS MMSI at anytime by selecting ATIS
MMSI
in the DSC SETUP menu.
6.9.4 ATIS
ENABLE
When ATIS is enabled, the following occurs:
DSC functions are disabled.
DUAL watch, Tri Watch and scan functions are disabled.
The following international channels are limited to 1 watt output power:
6,8,10,11,12,13,14,15,17,71,72,74,75,76,77(and 31, if enabled)
To enable/disable ATIS:
1) Select DSC SETUP, then ATIS ENABLE, Press the CH knob to displays
ATIS ENABLE ON/OFF.
2) Select ON for turn on ATIS function.
3) Press the CH knob to confirm your choice and return to the menu.
6.9.5 DSC ENABLE
Temporarily turn off the DSC function, such as sailing to inland water or no
DSC region.
1) Select DSC SETUP, then DSC ENABLE, Press the CH knob to displays DSC
ENABLE ON/OFF.
2) Select OFF for turn off DSC function. “DSC” icon on LCD will disappears
3) Ppress
the CH knob to confirm your choice and return to the menu.
GROUP SETUP
MANUAL NEW
> EILEEN
FRIENDS
EDIT NAME
>EILEEN
EDIT MMSI
053421608 EILEEN
053421608
>EDIT
DELETE
EILEEN
053421608
EDIT
>DELETE
DELETEGROUP
EILEEN
>YES
NO
GROUP SETUP
MANUAL NEW
> FRIENDS
CHANG
DSC SETUP
ATIS MMSI
ATIS ENABLE
>DSC ENABLED
DSC ENABLE
>ON
OFF
DSC SETUP
USER MMSI
>GROUP SETUP
ATIS MMSI GROUP SETUP
>MANUAL NEW
EILEEN GROUP NAME
> - - - - - - - - - -
GROUP MMSI
O - - - - - - - -
INPUT ATIS
MMSI
9 - - - - - - - - - ATIS MMSI
INPUT AGAIN
9 - - - - - - - - - ATIS MMSI
9100000053
>STORE
CANCEL
DSC SETUP
GROUP SETUP
ATIS MMSI
> ATIS ENABLE
ATIS ENABLE
>ON
OFF