NAVICOM RT-650, Owner'S Manual

Page: 19 / 32

37 38
6.8.2.2 CHANNEL NAME EDITING
1) Select RADIO SETUP then CH NAME, then CH INFO, Select the
desired channel name by CH knob and then press the CH knob the
screen shows the channel name and EDIT and DELETE.
2) Select EDIT and press the CH knob to edit the existing name tag, Input
the new name over the existing name and press the CH knob to
display the YES/NO conformation
3) Press the CH knob to confirm the new channel name then press cancel
to return to the menu.
6.8.3 RING VOLUME ADJUSTMENT
1) Select the RING VOLUME by CH knob and then display the option – HIGH
and LOW as ringer tone setting.
2)
Press The CH knob button again to confirm the changes.
6.8.4 KEY VOLUME ADJUSTMENT
1) The key beep tone volume level. Select the KEY BEEP by The CH knob
and then display the option – HIGH, LOW & OFF as key beep setting.
2) Press The CH knob button again to confirm the changes.
6.8.5 INT SPEAKER OPERATION
1) Select RADIO SETUP then INT SPEAKER.
2) Select ON (on) or OFF (off) as desired .
6.9 DSC
SETUP
The submenu is used to set behavior of the DSC/ATIS function.
The following 6 items are available for selection.
User MMSI
Group Setup
ATIS MMSI
ATIS ENABLE
DSC ENABLE
POS REPLY
6.9.1 ENTER YOUR USER MMSI (USER MMIS)
This is a once-only operation.
You must enter your user MMSI first then you can access the DSC functions.
1) Select DSC SETUP then USER MMSI and press the CH knob. If an
existing MMSI is stored, the values appear.
2) If the MMSI is blank, a dashes-line appears. Enter user MMSI along the
dashed line. Press the
CH knob to confirm each correct entry to move to
the next digit.
If your make an error, press –until < appears, then press the CH knob to
backup and correct the entry.
3) Hold the CH knob to store your user MMSI.
4) Enter your user MMSI again as a password check, hold the CH knob to
permanently store the your user MMSI and return to the menu.
5) You can view your stored user MMSI at anytime by selecting user MMSI
in the DSC SETUP menu.
6) If there is no USER MMSI stored and the radio’s DSC function is
attempted, the radio says “PLEASE INPUT USER MMSI” as below.
DSC WARNING MESSAGE
6.9.2 MAINTAIN GROUPS
You can program up to three group MMSI numbers and associated Group
names, group MMSI numbers always begin with a zero (0). You only enter
the last 8digits of the group ID number, the intial”0” is automatically entered.
PLEASE INPUT
USER MMSI
RADIO SETUP
CH NAME
> RING VOLUME
KEY BEEP
RING VOLUNE
>HIGH
LOW
RADIO SETUP
CH NAME
RING VOLUME
>KEY BEEP
KEY VOLUME
>HIGH
LOW
OFF
INPUT USER
MMSI
> - - - - - - - - USER MMSI
INPUT AGAIN
> - - - - - - - -
USER MMSI
500000001
>STORE
CANCEL
CALLING
DISPLAYNAME
>CH INFO
CH INFO
PORT OPS/VTS
PORT OPS/VTS
> EDIT
DELETE
RADIO SETUP
RING VOLUME
KEY BEEP
> INT SPEAKER
INT SPEAKER
>ON
OFF