FS M6500 Series, Configuration Manual

Page: 134 / 185

M6500 Series NE Configuration Manual
133
Figure8-2 Current Alarm
The lower right corner of the alarm interface can filter the number of alarms displayed on the current page, and
the number of displayed alarms per page can be adjusted to 10, 20, 50 and 100 (as shown below).
Figure8-3 Show Number of Current Alarms
The upper part of the alarm interface is the " Query " part and the " Auto Refresh " button
，
the area under the
" Query " section is the " Ack ", " Unack ". The functions of these buttons are:
 The function of“ Ack ”button is to confirm the selected alarm. By ticking the check box on the left of the
alarm to be confirmed and clicking the " Ack " button, the selected alarms are all in the confirmation state.
The confirmation status of the confirmed alarm is "confirmed" and the "confirmation" icon becomes
green with specific confirmation person and confirmation time. The specific operation is: select the
alarm to be confirmed
→ click the " Ack " button → click on" apply " → confirm the alarm.
Because the current page will refresh once in 10 seconds, the selected alarm will become unchecked after refreshing
if it is not confirmed in time.