M6500 Series NE Configuration Manual
15
Steps to add a child group:
1. Click on the created group;
2. Click on“
Group Configuration
”on the right to continue adding a child group
;
3. Enter the name of the child group in the“
Add Group
”
module
;
4. Click on“
Apply
”to add a child group.
Figure2-4 Add a Child Group
2.4. Add NE
2.4.1. Add NE
Steps:
1. Click on the group which has been added, and select “
Group Configuration
”on the right;
2. Input the NE name, NE IP address, subnet mask, Trap host name, Trap host IP address in the“
Add
NE
”
module
;
3. Click on“
Apply
” to save the configuration.
: The trap host IP address is the network management server IP address.
Summary of Contents for M6500 Series
