Foma SO903iTV, Manual

Page: 79 / 390

77
PushTalk
Using the Display during PushTalk Communication
Ｏｎ ＰｕｓｈＴａｌｋ
ドコモ一郎


Main display
Sub-display
ドコモ一郎
ドコモ一郎 Ｃｏｎｎｅｃｔｅｄ
ドコモ三郎 Ｃｏｎｎｅｃｔｅｄ
ドコモ二郎 Ｄｉｓｃｏｎｎｅｃｔ
０９０ＸＸＸＸＸＸＸＸ Ｃａｌｌｉｎｇ
○○○同好会
Ｏｎ ＰｕｓｈＴａｌｋ







: During PushTalk communication

: Hands-free ON

Active speaker
The phone number (or the member name when the speaker is saved in
the Phonebook) appears
[Myself] : You are currently the active speaker (you can speak)
[User Unset] : The Caller ID of the caller is set to [OFF]
[?] : The active speaker is not identified
(No indication) : There is no active speaker (open status)

Group name
Displayed only in the display of the caller who originated a call using a
group

Members
The phone number (or the member name when the member is saved in
the Phonebook) appears
[User Unset] : The Caller ID of the caller is set to [OFF]

Communication status
Connected : The caller who originated a PushTalk call
Connected : Currently participating in the PushTalk communication
Calling ※ : The recipient’s terminal is ringing
Disconnect ※ : The recipient ended the PushTalk session, does not
answer the call, or is outside of the service area.
Otherwise the recipient’s terminal is powered off
Driving ※ : Public mode (Drive mode) is set
※ These icons appear only when PushTalk communication is performed
among several persons.
Operations during PushTalk Communication
Operation Key operation
Speak When the floor is open, you can speak only while you press and hold .
While another member has the floor, you cannot get it even if you press .
Add a member Press (Add). This operation is enabled only when you originate a PushTalk
call.
Display other members If all the members cannot be seen on the screen at once, press (Member ▼ )
to display the next screen.
Switch ON/OFF of the hands-free operation Press ( ). Every time you press the key, the ON/OFF setting is switched.
Adjust the volume of the caller’s voice Press .
Terminate a PushTalk call Press .
Receive a voice call Press (P.61).
If you receive a voice call, the PushTalk communication is terminated.
The operation for an incoming voice call while using PushTalk can be customized (P.85).
●
Each speech session granted by obtaining the floor is time limited. The obtained floor is released after
the time limit. The PushTalk communication is terminated if no member takes over the floor within a certain
interval.
● When there is any change in PushTalk communication status or a member takes over the floor, the signal
tone sounds.
● You cannot use i-mode during PushTalk communication.
● If you receive a voice call or the time set for the Alarm/Schedule alarm/Booking alarm is reached while you
are speaking in a PushTalk session, the floor you obtained is released.
● When you receive a videophone call, data communication, or a PushTalk call during PushTalk
communication, a new call is saved in the Received record and the current PushTalk call is continued.