Foma SO903iTV, Manual

Page: 206 / 390

204
Osaifu-Keitai/ToruCa
 Up to 20 ToruCa cards are saved in [Used]. When the number
of saved cards exceeds 20, the cards with the oldest date/
time are deleted, in that order.
1
From the Menu, select [Settings] → [Application] →
[ToruCa]
→
[Auto recognition] and press .
[ON]:
Available ToruCa cards are automatically recognized by
the reading device (reader/writer) and saved in [Used].
[OFF]:
Available ToruCa cards are not recognized by the
reading device (reader/writer).
To display the explanation about the Auto recognition
Move the cursor to [Auto recognition] and press (Help).
2
Select [ON]/[OFF] and press .
The Auto recognition is set.
When you select [ON]
Select [Yes].
● When the Lock all or PIM lock is set, a ToruCa card does
not move to [Used] even if it is to be deleted regardless of
the Auto recognition being set to [ON].
● If you hold up and show the FOMA terminal to a reading
device (reader/writer) with the Auto recognition set to
[OFF], a message confirming whether to use the Automatic
reading function or stating that the Automatic reading
function is OFF may appear. To use the Automatic reading
function, select [Yes] to set the Auto recognition to [ON].
Setting Whether to Check the
Duplication of a ToruCa(Detail) Card
Default ON
You can set the FOMA ter minal to check if the
ToruCa(detail) card you are trying to obtain has been
obtained already when you obtain the card from a
reading device (reader/writer).
1
From the Menu, select [Settings] → [Application] →
[ToruCa] → [Duplication check] and press .
[ON]:
Check if a target ToruCa(detail) card is already obtained.
Do not obtain a ToruCa card that you have obtained
already. Obtain a ToruCa card only when you have not
obtained it yet.
[OFF]:
Do not check if a target ToruCa(detail) card is already
obtained.
2
Select [ON]/[OFF] and press .
The Duplication check is set.
Setting Whether to Notify That within the
Communication Range
<IC act. Notice>
Default ON
You can set the FOMA terminal whether to notify you
of being within the FeliCa communication range or the
FeliCa communication being started by vibration or the
FeliCa Sign when you are close to a reading device
(reader/writer) with the FOMA terminal powered on.
1
From the Menu, select [Settings] → [Application] →
[IC act. Notice] and press .
Ｂｙ ｖｉｂｒａｔｏｒ
ＯＮ
Ｂｙ ＬＥＤ
ＯＮ
ＩＣ ａｃｔ． Ｎｏｔｉｃｅ
[By vibrator]:
S e t w h e t h e r t o a c t i v a t e t h e v i b r a t o r w h e n t h e
communication starts.
[By LED]:
Set whether to turn on the FeliCa Sign when you enter
the range in which communication is enabled or when
the communication starts.
2
Select [ON]/[OFF] of the vibrator at [By vibrator].
3
Select [ON]/[OFF] of the FeliCa Sign at [By LED].
● When the Public mode (Drive mode) is set, the FeliCa Sign
does not light and the vibrator does not operate even if the
By vibrator and By LED are set to [ON].
Locking the IC Card Function
<IC card lock>
You can lock the IC card function to prevent others
from using it.
1
Press ( ) for over a second in the stand-by display.
The IC card function is locked and
“
” appears.
To cancel the IC card lock
Press ( ) for over a second
in the stand-by display, enter the
Security code, and press
(OK).
Locking the IC Card Function When
the FOMA Terminal Is Powered Off
Default IC card lock: OFF, IC lock(power-off): Last status
You can set to automatically lock the IC card function
when the FOMA terminal is powered off.
1
From the Menu, select [Settings] → [Lock/Security]
→ [IC card lock] and press .
The Security code screen appears.
2
Enter the Security code and press (OK).
ＩＣ ｃａｒｄ ｌｏｃｋ
ＯＦＦ
ＩＣ ｌｏｃｋ（ｐｏｗｅｒ−ｏｆｆ）
Ｌａｓｔ ｓｔａｔｕｓ
ＩＣ ｃａｒｄ ｌｏｃｋ
[IC card lock]:
Set whether to lock the IC card function.
[IC lock(power-off)]:
Set whether to automatically lock the IC card function
when the FOMA terminal is powered off.
3
Select [Last status]/[Locked] at [IC lock(power-off)].
[Last status]:
Keep the current status even after the FOMA terminal is
powered off.
[Locked]:
Lock the IC card function when the FOMA terminal is
powered off.