Foma SO903iTV, Manual

Page: 87 / 390

85
PushTalk
1
From the Menu, select [Settings] → [Application] → [PushTalk] → [Caller ID] and
press .
[ON] : When you originate a PushTalk call or add members during PushTalk communication, the phone
numbers of the caller (yourself) and all the other members are displayed in the incoming call and
On PushTalk displays of all the members’ terminals.
[OFF] : When you originate a PushTalk call or add members during PushTalk communication, the caller
(yourself) and members are displayed as “User Unset”.
2
Select [ON]/[OFF] and press .
The Caller ID is set.
● Even if you change the [Caller ID] setting, the [Set Notification] setting is not changed.
● If you specify [Call with ID]/[Call with no ID] as a call condition from the Call condition menu when
originating a PushTalk call, the phone numbers of all members including the caller (yourself) or none of the
phone numbers are notified to all members depending on which call condition you select (P.55).
●
If several settings regarding sending the Caller ID are in conflict with each other when you originate a
PushTalk call, the following priority is applied.
1. Call condition you selected when originating a call
2. Setting for [Caller ID]
Setting How to Answer a Voice Call during PushTalk Communication
Default Call Rejection
You can set how to answer a voice call when you receive it during PushTalk
communication.
1
From the Menu, select [Settings]
→
[Application]
→
[PushTalk]
→
[P-Talk arrival act]
and press .
[Answer] : Receive a voice call and you can answer it. If you receive a voice call while you have
the floor, you loose the floor.
[Call Rejection] : Reject an incoming voice call. The missed call notification icon appears and the call is
saved in the Received record.
[Voice Mail] : Connect an incoming voice call to the Voice Mail Service Center.
[Call Forwarding] : Connect an incoming voice call to a forwarding number.
2
Select the operation to be performed when you receive a voice call during PushTalk
communication and press .
The P-Talk arrival act is set.
Setting Whether to Receive a PushTalk Call during i-mode
Default Prefer PushTalk
You can set whether to receive a PushTalk call by disconnecting i-mode if there is any
incoming PushTalk call during i-mode or i-mode communication.
Continued