Foma SO903iTV, Manual

Page: 294 / 390

292
Data Communication
Preparations and Flow of Data
Communication
The preparations required for performing packet and
64K data communication by connecting the FOMA
terminal to a PC are given below.
When you use the
FOMA PC setup
software
Install the communication configuration files (drivers).
Connect the FOMA terminal to a PC.
Check the installed communication configuration files (drivers).
Set a host.
Packet
communication
 “mopera U” or
“mopera”
 Other provider
Perform communication.
Start up communication software that is
compatible with AT commands.
Set a host.
Set ON/OFF for the Notify caller ID.
Set up the dial-up network.
Perform dial-up connection.
When you do not use
the FOMA PC setup
software
64K data
communication
 “mopera U” or
“mopera”

Other provider
Install the FOMA PC setup software.
AT Commands
AT commands are the commands (instructions) that
are executed on a PC for setting and changing the
functions of the FOMA terminal.
For more information on the AT commands, see
the “Manual for Data Communication” (PDF format)
included in the supplied CD-ROM.
About the Supplied CD-ROM
The supplied CD-ROM contains the software required
for data communication using the FOMA terminal and
the “Manual for Data Communication”/“Kuten Code
List” operation instructions (PDF format). For details,
see the supplied CD-ROM.
<Software/PDF>
◆ SO903iTV communication configuration files
◆ FOMA PC setup software
◆
General information about DoCoMo keitai datalink
◆ FirstPass PC software
◆ General information about mopera U
◆ “Manual for Data Communication” in PDF format
◆
“Kuten Code List” in PDF format
◆ Adobe
®
Reader
®
8.0
◆ SonicStage CP (SonicStage Ver.4.3)
● When you set the supplied CD-ROM in the PC, a warning
window as shown below may appear. This warning
appears because of the security setting on the Internet
Explorer, however, causing no problem for use.
Click [ はい ].
※ The window example assumes that Windows XP is
used as an operating system. The actual window that
appears may differ depending on your PC environment.
Introduction of DoCoMo keitai datalink
“DoCoMo keitai datalink” software is used to make
backup files of the Phonebook and mail, etc. to a PC
from your mobile phone and edit the data on the PC.
This software is provided on the DoCoMo’s website.
For more information about this software and how to
download this software, see the following website.
You can also access the following website from the
supplied CD-ROM.
http://datalink.nttdocomo.co.jp
For more details about the downloading method, data that
can be transferred, supporting OS, operating environment,
installation method, operation method, and restrictions, see the
above website.
For the operation procedure after installing the software, see
the Help of the software.
A FOMA USB Cable (optional) is required to use the DoCoMo
keitai datalink software.