Foma SO903iTV, Manual

Page: 179 / 390

177
Mail
Saving i-mode Mail to Send
Later
<Save mail>
If you do not want to send composed mail immediately,
you can save it in [Draft].
1
Press (Func) in the Edit mail display.
The Function menu appears.
2
Select [Save] and press .
The composed mail is saved as unsent mail in [Draft].
To edit saved mail
From the Mail menu, select [Draft]
→
[Draft]
→
mail.
Receiving i-mode Mail
<Auto receive>
When mail is sent to the i-mode center, the FOMA
terminal automatically receives them.
Ｒｅｃｅｉｖｉｎｇ ｍａｉｌ
Ｕｎｒｅａｄ ｍａｉｌ／ｍｅｓｓａｇｅ
Ｍａｉｌ
ＭｅｓｓａｇｅＲ
ＭｅｓｓａｇｅＦ
１
０
０
While receiving mail, “ ” flashes.
To cancel receiving mail
Press (Cancel). “ ” appears
in the next display informing
the completion of reception.
Receiving may be completed
d e p e n d i n g o n t h e t i m i n g o f
cancellation.
When receiving is completed, “ ” is
displayed, the indicator flashes, the
ring tone sounds, and the number
of received mail is displayed.
T h e d i s p l a y b e f o r e r e c e i v i n g
reappears after about 15 seconds.
 When returning to the stand-by
display, the notification icon “ ”
(New mail) appears. Press (Link)
and select “ ” to display the Inbox
display.
● You can automatically receive up to 100K bytes of data
in each mail, including the file attachment. You have to
manually obtain a file attachment exceeding 100K bytes
from the i-mode center (P.180).
●
If new mail is received when the number of saved received
mail has reached 1,000 or there is not enough free space,
the unprotected read mail is overwritten from the oldest.
● When you receive multiple mail at the same time, the ring
tone, call picture, and indicator color of the last received
mail have priority.
● Mail that has been sent to you in the following situations is
held at the i-mode center.
- During a videophone call
- When the FOMA terminal is powered off
- When the FOMA terminal is outside of the i-mode
service area
- During PushTalk communication
- While receiving SMS
- While the Self mode is set
- While the Omakase Lock is set
- During the infrared communication
- During the iC communication
- While connected to the FirstPass Center
- While connected to the Data Security Service Center
- While updating the software
● Some mail is held at the i-mode center when “ ” appears
(sometimes “ ” does not appear even if mail is held at the
i-mode center).
If the maximum number of mail is held at the i-mode
center, “ ” appears. In this case, check the contents of
unread mail, delete unnecessary received mail, or cancel
protection of received mail before performing the Check
new messages.
● When the size of received mail (number of characters
and file attachment size) has exceeded the number
of characters (data size) specified at Limit Mail Size
accessible through [i Menu]
→ [English iMenu] →
[Options] → [Mail Settings], the file attachment cannot be
received automatically.
Selecting to Receive i-mode
Mail
<Receive option>
You can check through mail held at the i-mode center,
where you can select mail to receive and delete mail
without receiving it based on the information such as
mail subject. To use this function, set the Recv option
setting to [ON]. When the Recv option setting is set to
[ON], i-mode mail is not received automatically.
 When the Recv option setting is set to [ON], the Mail tone
does not sound and when the Manner mode or Vibrator is set,
the vibrator does not operate.
Ｍａｉｌ ａｔ ｃｅｎｔｅｒ
When receiving mail, the notification
icon “
” (Mail at center) appears.
To check mail
Press (Link) in the stand-by
display and select “ ” → [Yes].
The FOMA terminal is connected
to the i-mode center.
Continued