Foma SO903iTV, Manual

Page: 367 / 390

10
7
Click [ 追加 ] and set a host (APN) and click [OK].
Set 2 or a number between 4 and 10 for cid.
8
Select the newly added host (APN) and click [OK].
9
Click [ 次へ ].
10
Select a choice of accessible users, set [ ユーザ ID]
and [ パスワード ], and click [ 次へ ].
To set [ ユーザ ID] and [ パスワード ], enter the appropriate
information supplied by your provider accurately with
careful attention to the letter case.
11
Put a checkmark for [ 最適化を行う ] and click [ 次へ ].
 If you have performed the optimization already, the
window for optimization does not appear.
12
Check the setting information and click [ 完了 ].
13
Click [OK].
 When you performed the optimization in step 11,
the window for confirming whether to restart the PC
appears. Click [
はい
].
Easy Setup (64K Data Communication)
When Using “mopera U” or “mopera”
 Note that 64K data communication could be expensive if it is
performed for a long period of time.
1
Start the FOMA PC setup software and click [ かん
たん設定 ].
2
Select [64K データ通信 ] and click [ 次へ ].
3
Select [ 『 mopera U 』への接続 ] or [ 『 mopera 』への接
続 ] and click [ 次へ ].
When you select [ 『 mopera U 』への接続 ], the confirmation
window for subscription appears. If you have already
subscribed to “mopera U”, click [
はい ].
4
Enter a host name (any name) at [ 接続名 ] and click
[ 次へ ].
 You cannot enter half-width characters, “¥” “/” “:” “ ＊ ” “?”
“<” “>” “|” “”” and “!”.

If [FOMA SO903iTV] is not set for [ モデムの選択 ], select
[FOMA SO903iTV].
 To connect to “mopera U” or “mopera”, your caller ID
must be notified. Select [186 を付加する（通知する） ].
5
Select a choice of accessible users and click [
次へ
].
You can connect with [
ユーザ
ID] and [
パスワード
] left
blank.
6
Check the setting information and click [ 完了 ].
7
Click [OK].