Foma SO903iTV, Manual

Page: 332 / 390

330
Appendix/External Devices/Troubleshooting
Updating the Pattern Definitions
1
From the Menu, select [Settings] → [Management] → [Scan function] → [Update]
and press .
Ｙｅｓ
Ｎｏ
Ｕｐｄａｔｅ ｐａｔｔｅｒｎ
ｄｅｆｉｎｉｔｉｏｎｓ？
2
Select [Yes] → [Yes] and press .
Ｒｅａｄｙ ｔｏ
ｓｅｎｄ ｙｏｕｒ
ｔｅｒｍｉｎａｌ ＩＤ？
Ｙｅｓ
Ｎｏ
Ｕｐｄａｔｅ
Ｄｏｗｎｌｏａｄｉｎｇ
When the pattern definitions are the latest available
There is no need to update the pattern definitions. Use them as is.
● When you update the pattern definitions, your mobile phone-specific information (such as model and
manufacturer’s serial number) is automatically sent to the server (server for the scanning function under
DoCoMo’s supervision). DoCoMo will not use the information sent from your mobile phone for any purposes
other than the scanning function.
● You cannot update the pattern definitions in the following cases:
- When the date/time is not set - When “ ” is displayed
- During a call - While the Self mode is set
- While the Lock all is set - While the PIM lock is set
- While the Omakase Lock is set - When the UIM is not inserted
- When another function is being used
- When the FOMA terminal is connected to an external device such as a PC
● If you cancel the downloading operation before it is completed, the data downloaded until this point is
deleted.
Setting Whether Pattern Definitions Are Automatically Updated
You can set whether to update the pattern definitions automatically.
1
From the Menu, select [Settings] → [Management] → [Scan function] → [Set auto-
update] and press .
Ｓｅｔ ａｕｔｏ−ｕｐｄａｔｅ
ｏｆ ｐａｔｔｅｒｎ
ｄｅｆｉｎｉｔｉｏｎｓ
Ｖａｌｉｄ
Ｉｎｖａｌｉｄ
[Valid] : Update the pattern definitions automatically.
[Invalid] : Do not update the pattern definitions automatically.
2
Select [Valid] → [Yes] → [Yes] and press .
The Set auto-update is set.