Foma SO903iTV, Manual

Page: 81 / 390

79
PushTalk
Adding a Member during PushTalk Communication
If you originate a PushTalk call, you can add a member during PushTalk communication.
You can add members up to the maximum number allowed for communication (up to five
persons including yourself) and also place a second call to a non-participating member.
Example: Selecting a member from the PushTalk phonebook
1
Press (Add) during PushTalk communication.
The screen for selecting the method of adding a member appears.
[View PushTalk PB] : Select a member from the PushTalk phonebook.
[View phonebook] : Select a member from the FOMA terminal phonebook.
[Direct input] : Enter a phone number directly.
2
Select [View PushTalk PB] and press .
携帯あき子
携帯なつ子
携帯はる子
ドコモ一郎
ドコモ二郎
Ｍｅｍｂｅｒ Ｇｒｏｕｐ
To select a member from a group
Press and select a group.
3
Select a member and press .
“ ” appears for the selected member.
4
Press (Complete).
The Members to add display appears.
5
Press (Call).
Ｍｙｓｅｌｆ
携帯あき子 Ｃｏｎｎｅｃｔｅｄ
ドコモ一郎 Ｃｏｎｎｅｃｔｅｄ
ドコモ二郎 Ｃｏｎｎｅｃｔｅｄ
携帯はる子 Ｃａｌｌｉｎｇ
Ｏｎ ＰｕｓｈＴａｌｋ
The FOMA terminal starts calling the selected member.
● Members added during PushTalk communication are not displayed in the detailed information of the Redial/
Received record.
● You can add a party who uses a PushTalk-compatible model, as a PushTalk group member. However, this
added member is not displayed on the displays of other than the following models ※ and the signal tone
does not sound either.
※ 903i series, 904i series, and 703i series (excluding N703iD, F703i, D703i, P703iµ, and N703iµ)
Receiving a PushTalk Call
When you receive a PushTalk call, you are notified by flashing indicator, ring tone,
vibrator, etc. The operation for an incoming PushTalk call varies depending on the
settings of the Incoming set, Manner mode, etc.

If you receive a PushTalk call during a voice call, the PushTalk call is not connected. The notification icon of
missed call appears and the call is saved in the Received record. A PushTalk call received during a videophone
call or data communication is not connected, either. The call is not saved in the Received record.

When receiving a PushTalk call during i-mode communication, the setting for the i-mode arrival act is applied.
Continued