11
EN
10
normally without the drive even if the assistance
function .is .no .longer .being .provided .by .the .motor. .
If .an .error .is .displayed, .troubleshoot .it .according .to .
the measures described in the table below and/or
contact .your .FLYER .specialist .retailer.
You . can . find . information . on . the . individual . error .
codes .in .the .error .table.
The error code gives a precise description of the
error.
Figure 17: Error display
5.5.13
Reset values – menu
In .this .menu, .the .trip .data .and .the .system .can .be .
reset .to .the .factory .settings.
Selection
Description
Reset trip data
Resets the trip data
(see .5.5.12 .Resetting .
trip data)
Restore factory
settings
Returns the system to
its default state
Figure .18: .Reset .values .– .menu
Press . the . joystick . to . reset . the . data . after . confir-
mation.
5.5.14
About menu
The . About . menu . shows . the . current . software
versions .of .the .individual .components.
Figure .19: .About .menu
5.5.15
Shimano Di2
If the e-bike has an electronic Shimano speed
gear (Shimano Di2), the corresponding gears
are shown on the display.
1. . Currently . selected . gear . in . the . integrated .
two-gear . unit . in . the . motor. . (only . in . combination .
with .the .X1 .motor .unit). .
2. . Currently . selected . gear . in . the . Shimano . gear .
hub.
5.5.16
NuVinci H/SYNC
If .your .FLYER .e-bike .has .an .automatic .NuVinci .H/
SYNC .gear .hub, .the .hub .may .need .to .be .recali-
brated. .This .is .the .case .if .you .suspect .that .you .are .
not .getting .the .full .transmission .range.
