![Flyer Intelligent Technology Panasonic Instructions Manual Download Page 231](http://html1.mh-extra.com/html/flyer/intelligent-technology-panasonic/intelligent-technology-panasonic_instructions-manual_2311451231.webp)
31
EN
30
Driving without drive assistance
You .can .also .drive .your .FLYER .without .drive .as-
sistance .by .selecting .the .assistance .mode .“OFF”. .
However, you must ensure that your system is
always .switched .on.
Never . drive . without . a . battery . or . with .
your system switched off, as the func
-
tions of the operating unit and the light
-
ing functions are not available in this
case.
Always .remove .the .battery .before .clean-
ing, .maintaining .or .repairing .your .e-bike.
Ensure that you do not touch and thus
possibly connect contacts when clean
-
ing .or .maintaining .the .battery.
You .risk .being .hurt .and .the .battery .may .
suffer .damage .if .the .contacts .are .live.
Do . not . use . a . strong . water . jet . or .
high-pressure .cleaner .for .cleaning. .The .
cleaning . liquid . may . enter . sealed . bear-
ings due to high pressure, dilute the
lubricant .and .increase .friction. .As .a .re-
sult, rust is formed which destroys the
bearings. .Cleaning .with .a .high-pressure .
cleaner may damage the electrical sys
-
tem.
The following are not suitable for clean
-
ing .your .FLYER .e-bike:
•
Acids
• Fats
•
Oil
• Brake cleaner (only to use on brake
discs)
•
Solvent-based .liquids.
These damage the surfaces and contrib
-
ute .to .wear .on .the .FLYER .e-bike.
After .use, .ensure .that .you .dispose .of .the .
lubricant, cleaning and care products in an
environmentally .friendly .way. .These .sub-
stances do not belong in domestic waste,
in .the .drain .or .in .natural .environments.
Smooth operation and durability of your
FLYER . e-bike . depend . on . appropriate .
maintenance .and .care .for .your .FLYER.
•
Regularly . clean . your . FLYER . with .
warm water, small amounts of clean
-
ing .agent .and .a .sponge.
•
While . cleaning . the . FLYER, . always .
check .your .e-bike .for .cracks, .notches .
or .material .deformities.
• Damaged parts must be replaced with
original .spare .parts. .Please .only .ride .
your . FLYER . again . after . this . check .
has .been .carried .out.
• Have any paint damage removed by
your .FLYER .specialist .retailer.
Further important information concerning care for
your .FLYER .e-bike .is .provided .on .the .website .of .
the .respective .component .manufacturer.
5.23
Battery
SIB .down .tube .battery
Check the battery before you charge it
for .the .first .time .or .use .it .in .your .FLYER .
e-bike.
Completely charge the battery using the
charger .before .the .first .ride .to .ensure .full .
battery .performance. . Read . and . adhere .
to the operating instructions for the
charger .when .charging .the .battery.
Charging status indicator
The main menu “Drive” on your display contains
a symbol that indicates the battery charge level,
which .is .also .shown .as .a .percentage. .
In .all .other .menus, .the .charge .level .is .displayed .
as .a .symbol .in .the .top-left.
If .the .charge .level .is .less .than .20%, .the .battery .
is .red.