Flyer Intelligent Technology Panasonic, Instructions Manual

Page: 225 / 328

24 25
EN
Category Code Displayed text Remedy
66 34
Battery overheated
Protection mode has been activated as the
battery is overloaded. Let the battery cool and
restart the system.
66 35
67 32 Battery identification error
Ensure that an original FLYER battery is con-
nected and the battery connections are free of
dirt. Restart the system.
68 33 Battery communication error
Ensure that the battery connections are free of
dirt and restart the system.
69
36
40
41
Motor unit error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
6A 37
Motor overheated
Protection mode has been activated as the drive
unit is overloaded. Let the drive unit cool and
restart the system.
6A 38
6B 39 Speed sensor error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
6C 3A Torque sensor error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
6D 3C Motor drive unit error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
6E 3D
Di2 component communica-
tion error
Check the cabling of the Di2 components and
restart the system. If the problem persists, con-
tact your FLYER specialist retailer.
6F 3E
Di2 component connection
error
Check the cabling of the Di2 components and
restart the system. If the problem persists, con-
tact your FLYER specialist retailer.
70 3F Di2 general error
Check the cabling of the Di2 components and
restart the system. If the problem persists, con-
tact your FLYER specialist retailer.
72 3B Motor communication error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
73 3B CANTL communication error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
74 CANTL servicing error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
11 58 NuVinci communication error
Check the connections to the NuVinci gear
system.
Remove the battery and put it back in before
restarting the system.
12 59 NuVinci initialisation required
Initialise the NuVinci gear system. Settings ->
Calibration -> Calibrate NuVinci
37 42 Bluetooth error
Restart the system. If the problem persists,
contact your FLYER specialist retailer.
38
43
44
45
46
Display Software
Restart the system. If the problem persists,
contact your FLYER specialist retailer.