45
EN
44
Lift .the .unlocking .bolt .(2).
The .handlebars .can .now .be .turned .sideways .(3). .
The . bolt . automatically . latches . in . the . 90-degree .
position . (4). . Completely . close . the . quick-release .
lever .so .that .the .handlebars .are .safely .fastened.
Turning . back . the . handlebars: . Lift . the . unlocking .
bolt .(1).
Then .turn .the .handlebars .back .to .the .riding .posi-
tion .(2). .The .bolt .must .be .re-latched .(3).
2
4
3
90°
1
3
2
90°
Completely .close .the .quick-release .lever .(4).
The .Speedlifter .quick-release .lever .must .
be completely closed during the ride,
just .like .any .other .quick-release .fasten-
er. .It .must .also .be .ensured .that .the .un-
locking .bolt .is .latched .in .the .front .hole. .
Never . adjust . the . handlebars . while . rid-
ing.
Read the instructions of the component
manufacturer and for more information
visit: .www.speedlifter.com.
Adjusting the stem
For . all . stems, . please . read . the . instruc-
tions .supplied .by .the .manufacturer. .Only .
allow .FLYER .specialists .to .work .on .the .
handlebars .and .stem.
The following stem types are installed on
FLYERS: .
A-head stem
Adjustable stem
The . incline . of . the . stem . can . be . adjusted . to . your .
requirements. .Depending .on .the .model, .the .lateral .
or internal fastening screw must be loosened and
tightened .again .after .adjustment .with .the .correct .
fastening .torque.
4
Adjustable .stem .
Fastening screw
