Flavor Burst TS 80BLD, Manual

Page: 29 / 96

28
5. When the Drive Assembly Gear Box has
soaked for at least 5 minutes, brush and
clean all exposed surfaces and openings
with detergent water and rinse thoroughly.
The Suspension Bracket may be
disassembled for a more thorough cleaning
if necessary.
26065
NOTE:
UNDER NORMAL OPERATING
CONDITIONS, IT IS NOT ADVISORY TO
BRUSH OTHER AREAS INSIDE THE DRIVE
ASSEMBLY GEAR BOX. DOING SO MAY
CAUSE DAMAGE.
NOTE:
DO NOT OPEN OR DISASSEMBLE
THE DRIVE ASSEMBLY GEAR BOX.
6. Brush and clean the Adapter and o-ring.
26139
7. Place the Gear Box, Suspension Bracket,
Gear Cartridge, Spout Adapter, and
Blending Head in approved sanitizer
solution and soak for at least 1 minute.
26066
8. Remove each part from the sanitizer
solution. Place the items on a sanitary tray
to air dry.
26067
9. Spray the Syrup Line Manifold opening with
approved sanitizer solution. Allow it to
sanitize for at least 1 minute.
26078
10. Dry the end of the manifold with a clean
single service towel.
DRY
26188
11. Install the cap on the manifold.
26189