Flavor Burst TS 80BLD, Manual

Page: 82 / 96

81
Enabling the Pass Code Feature
The TS 80BLD system can be set with a pass
code to protect access and changes to the
other Touchscreen settings. When enabled,
the operator will be required to enter the pass
code in order to make changes to the touch
screen settings. In certain settings, such as a
self-service operation, this protects the
Touchscreen from unauthorized changes. The
pass code when enabled is 3141.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the pass code if required (3141).
Injector Flush
Chocolate Swirl
Strawberry
Butter Pecan
Classic Cherry
Banana Ripple
Green Apple
Blue Goo
Purple Grape
Setup
26501
2. Press the SYSTEM SETUP key.
Exit
Setup and Maintenance
System Setup
Maintenance
26533
3. Press the PASSCODE ENABLE key.
Back
Done
System Setup
Exit to Menu
Second Language
Passcode Enable
Program Updates
Initial Equipment
Setup
Diagnostics
Touch Screen
Calibration
26565
4. Check the PASSCODE ENABLE box to
protect the Touchscreen settings with a
pass code.
Back Done Passcode Enable Screen
Passcode Enable
Passcode Enable
26505
NOTE:
TO REMOVE THE PASS CODE
REQUIREMENT, PRESS THE PASS CODE
ENABLE BOX UNCHECK IT.
5. Press DONE to return to the main screen.
Done
26508
6. Whenever the Pass Code screen appears,
the operator must enter the pass code 3141
in order to proceed to the next screen.
Enter Pass Code
clear
back
to
menu
0
9 8 7
6 5 4
3 2 1
Pass
Code:
3141
26506