Flavor Burst TS 80BLD, Manual

Page: 56 / 96

55
4. Connect the Drive Motor cable to the Drive
Motor.
26048
5. Use the Gear Box thumb nut to adjust the
Suspension Bracket horizontally so that it
hangs straight down from the door nut.
26085
6. Use the two screws to adjust the bracket
vertically so that it supports the Blending
Assembly in a level position.
LEVEL
26084
7. Tighten the thumb nut and screws to secure
the Suspension Bracket.
NOTE:
THE SUSPENSION BRACKET
SHOULD BE POSITIONED ON THE DRIVE
ASSEMBLY GEAR BOX DURING INITIAL
SET-UP AND DOES NOT NEED TO BE
REMOVED DURING OPENING OR CLOSING
PROCEDURES UNLESS IT REQUIRES A
MORE THOROUGH CLEANING.
8. Turn the Blending Head syrup port towards
the 9-Tube Assembly. Insert the manifold
into the Blending Head syrup port and rotate
it until motion stops to secure.
26044