Flavor Burst TS 80BLD, Manual

Page: 88 / 96

87
3. Press the SETUP OPTIONS key.
Back Done
Maintenance
Setup Options
Prime Syrup Pump
Serving Counter
Timing Settings
Water/Syrup Flush
Menu Setup
Adjust Dispense Rate
26548
4. Select ENABLE SELF SERVE MODE and
also ENABLE DISPENSE INSTRUCTION
SCREEN by touching the box so the check
mark appears.
Back
Done
Spout Setup Options
Enable Timed
Serving Size
Enable Injector Flush Enable FCB Purge
Enable Self Serve
Mode
Enable Dispense
Instruction Screen
Enable Auto
Dispense Mode
26554
NOTE:
INJECTOR FLUSH AND TIMED
SERVING SIZE ARE NOT COMPATIBLE
WITH THE SELF SERVE MODE.
NOTE:
“ENABLE AUTO DISPENSE MODE”
AND “ENABLE FCB PURGE” ARE FOR USE
WITH FROZEN CARBONATED BEVERAGE
SYSTEMS ONLY.
NOTE:
IT IS RECOMMENDED (HOWEVER,
NOT ESSENTIAL) TO ENABLE THE
DISPENSE INSTRUCTION SCREEN WHEN
USING THE SELF SERVE MODE.
DESELECTING THE INSTRUCTION SCREEN
WILL ELIMINATE THE “NEXT” KEY IN THE
CORNER AND THE OPERATOR CAN SIMPLY
DRAW THE SERVING WITHOUT
INSTRUCTION.
5. Press the DONE key to return to the main
screen.
Done
26508
6. Ensure the “Make Selections” phrase
appears above the flavor selections and that
the “NEXT” key is in the upper right corner.
To test the instruction screen, select the
flavor(s) and press the NEXT key in the
upper right corner.
Chocolate Swirl
Strawberry
Butter Pecan
Classic Cherry
Banana Ripple
Green Apple
Blue Goo
Purple Grape
Setup
Make Selections
Next
26579
NOTE:
THE SETUP KEY IN THE UPPER
LEFT CORNER IS PRESENT, ALTHOUGH
NOT VISIBLE.
7. The next screen will show instructions on
drawing the product. After a few moments,
the screen will default to the main screen.
Back
Use Draw Handle
to Dispense Product
26595