Flavor Burst TS 80BLD, Manual

Page: 79 / 96

78
Enabling the Injector Flush Feature
The Injector Flush function allows the operator
to flush sanitizer solution through the Blending
Head spout between servings. This clears out
product and residual flavor to reduce carryover
to the next serving. You can also deactivate
the Injector Flush for self-serve operations.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
Injector Flush
Chocolate Swirl
Strawberry
Butter Pecan
Classic Cherry
Banana Ripple
Green Apple
Blue Goo
Purple Grape
Setup
26501
2. Press the MAINTENANCE key.
Exit
Setup and Maintenance
System Setup
Maintenance
26531
3. Press the SETUP OPTIONS key.
Back Done
Maintenance
Setup Options
Prime Syrup Pump
Serving Counter
Timing Settings
Water/Syrup Flush
Menu Setup
Adjust Dispense Rate
26548
4. Check the ENABLE INJECTOR FLUSH box
to activate the flush function. The Injector
Flush key will then appear on the main
menu above the flavor list. Or, deselect the
box to remove the Injector Flush function.
Back Done
Spout Setup Options
Enable Timed
Serving Size
Enable Injector Flush Enable FCB Purge
Enable Self Serve
Mode
Enable Dispense
Instruction Screen
Enable Auto
Dispense Mode
26553
5. Press DONE to return to the main screen.
Done
26508
6. Verify the Injector Flush key appears above
the list of flavors.
Injector Flush
Chocolate Swirl
Strawberry
Butter Pecan
Classic Cherry
Banana Ripple
Green Apple
Blue Goo
Purple Grape
Setup
26513
7. Hold a container under the dispensing spout
and press INJECTOR FLUSH.
Injector Flush
26250