Flavor Burst TS 80BLD, Manual

Page: 72 / 96

71
3. In one smooth motion, draw a serving to
dispense product. Flavor will automatically
dispense as the product is served.
26211
NOTE:
IF YOUR SYSTEM HAS A DRAW
HANDLE SWITCH, PRESS THE SWITCH
AGAINST THE DRAW HANDLE WHILE
MOVING THE DRAW HANDLE INTO THE
FULL “OPEN” POSITION. THIS ACTIVATES
THE FLOW OF SYRUP TO THE SPOUT.
4. When the system beeps to indicate the
serving size is reached, move the draw
handle into the “closed” position. Flavor
flow automatically ceases just before the
beep, allowing unflavored product to
dispense briefly to clear the Blending Head
so that flavor carryover to the next serving is
minimized.
26212
NOTE:
IF YOUR SYSTEM HAS A DRAW
HANDLE SWITCH, RELEASE THE SWITCH
WHEN THE BEEP SOUNDS, DRAW FOR
ABOUT ONE SECOND AND THEN RETURN
THE DRAW HANDLE TO THE “CLOSED”
POSITION.
5. On occasion it may be desirable to sanitize
the Blending Head between servings.
Simply hold a container under the
dispensing spout and press INJECTOR
FLUSH.
Injector Flush
26250
NOTE:
IF NO “INJECTOR FLUSH” KEY ON
THE SCREEN, SEE THE “ENABLE THE
INJECTOR FLUSH FUNCTION” SECTION.
6. If no flavor is desired (i.e. – to draw vanilla),
simply deselect any selected flavor entry by
pressing it. Select a serving size and draw
a serving until a beep sounds.