Flavor Burst TS 80BLD, Manual

Page: 49 / 96

48
9. Press MAINTENANCE.
Exit
Setup and Maintenance
System Setup
Maintenance
26531
10. Press the WATER/SYRUP FLUSH key.
Back Done
Maintenance
Setup Options
Prime Syrup Pump
Serving Counter
Adjust Alternating Time
Water/Syrup Flush
Menu Setup
Adjust Dispense Rate
26544
11. The system is now in the Water / Syrup
Flush function mode. Press the flavor of the
line to be flushed.
Done
Back Water/Syrup Flush
Chocolate Swirl
Strawberry
Butter Pecan
Classic Cherry
Banana Ripple
Green Apple
Blue Goo
Purple Grape
Injector Flush
26580
12. The next screen will instruct you to connect
the Pump Flush Adapter (or Flush Line) to
the flavor connector, which you should have
already done in Step 6. It will also show a
START / STOP key.
Back Water/Syrup Flush
Connect Water Flush
Line to flavor connector
P2 - 1
and place container under spout
to collect flushed syrup
Start/Stop
26581
13. With a container under the spout, press the
START / STOP key and allow syrup line to
clear the sanitizer solution.
26258
Start / Stop
14. When the line is empty, touch the START /
STOP key again. Then, press the BACK
key to return to the Water / Syrup Flush
menu.
Back
26509
15. Disconnect the Water / Syrup Flush nozzle
from the Syrup Bag Connector. Connect
the nozzle to the next bag connector.
26263
16. Repeat Steps 11-15 for the second line,
then the third, and so on until all the lines
have been cleared of sanitizer solution.
17. Return the Pump Flush Adapter to the
position under the trays.