Flavor Burst TS 80BLD, Manual

Page: 33 / 96

32
14. Select the flavor you wish to use, then place
the bag on the table with the fitment up and
remove the dust cap.
26192
15. Lifting up with the bag fitment, press the
center pin of the bag fitment valve and
gently press on the bag to release any
excess air.
26193
16. Place the tray up-side-down over the bag
and pull the fitment into the tray opening as
shown. The grooves of the bag fitment
should slide into the tray opening.
26194
17. Holding the fitment in place, raise the open
end of the tray and flip the tray right side up.
As the tray is set back down, allow the bag
to settle in the tray.
26195
18. Make sure the syrup bag is settled neatly
into the tray, and then install the loaded tray
into the cabinet.
26196
19. If you removed a Syrup Bag Adapter and
lock from the previous bag, brush and clean
them with detergent water and then rinse
with clean water.
26072
20. Place the Adapter and lock in sanitizer
solution for at least 1 minute.
26073
21. Remove the Adapter and lock from the
sanitizer solution and place them on a
sanitary tray to dry.
26074