Flavor Burst TS 80BLD, Manual

Page: 28 / 96

27
Disassembling the Blending Assembly
1. Rotate the Drive Motor to unlock and
remove the Drive Motor from the Drive
Assembly Gear Box.
26030
2. Rotate the Blending Head to unlock it from
the Gear Box.
26031
3. Remove the Gear Cartridge from the Gear
Box.
26033
Sanitizing the Blending System
1. Mix approved detergent with warm water
according to manufacturer’s instructions.
Also prepare approved sanitizer solution
according to manufacturer’s instructions.
2. Place the Drive Assembly Gear Box in
warm water and soak for at least 5 minutes.
Proceed with Steps 3 and 4 in the
meantime.
26060
3. Brush and clean all exposed surfaces of the
Gear Cartridge with detergent water, then
rinse thoroughly.
26063
4. Brush and clean all exposed surfaces of the
Blending Head with detergent water, then
rinse thoroughly. Use a small brush to
ensure that the syrup orifices are clear of
any residual syrup.
26061