Flavor Burst TS 80BLD, Manual

Page: 76 / 96

75
5. Press the “<” and “>”keys beside the
second box of flavor names until the correct
flavor appears for syrup located in tray 1.
Back Done
Menu Setup
Chocolate
Pump
1
Check to Disable
26535
6. Repeat Steps 4 and 5 to assign flavors to
the remaining pumps.
NOTE:
IF YOU CANNOT FIND THE FLAVOR
LABEL YOU NEED, YOU MAY NEED TO
CREATE YOUR OWN. SEE SECTION
“TOUCHSCREEN OPERATIONS – UPDATING
AND CREATING TOUCHSCREEN LABELS.”
7. If a pump is not going to be used, check the
box next to “Check to Disable” at the bottom
of the screen to deactivate it.
Back
Done
Menu Setup
Pump
1
Check to Disable
26536
NOTE:
TO REACTIVATE THE PUMP, PRESS
THE BOX AGAIN TO UNCHECK IT.
8. Press DONE to return to the main screen.
Done
26508
Adjusting Flavor Dispense Rate
To produce the best serving, the output must be
adjusted to the proper level. Each flavor is
formulated to dispense at a standard level 5
which is, generally speaking, the recommended
flavor level. However, differences in freezers,
consumer preferences, and product mix and
dispense flow rate will determine what level is
appropriate for your operation. Fortunately, the
TS 80BLD system is adjustable for both flow
and taste at any time.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
Injector Flush
Chocolate Swirl
Strawberry
Butter Pecan
Classic Cherry
Banana Ripple
Green Apple
Blue Goo
Purple Grape
Setup
26501
2. Press the MAINTENANCE key.
Exit
Setup and Maintenance
System Setup
Maintenance
26531