Flavor Burst TS 80BLD, Manual

Page: 65 / 96

64
5. Enter the PASSCODE #3141.
Enter Pass Code
clear
back
to
menu
0
9 8 7
6 5 4
3 2 1
Pass
Code:
3141
26506
6. Read the instructions on the Pre-Setup
Verification screens (press Next to see
more rules). Follow the option that best suits
your freezer setup.
Next Back Pre-Setup Verification
The following rules MUST be followed
for the touch screen to operate properly.
1. When one machine is operated by the touch screen:
- Flavoring units should be attached to the P2 connector.
- Mix-in units should be attached to the P3 connector and
assigned to Spout B.
- For TS 44 units, the draw switch and injector/blender for
flavors 1-4 should be operated from P2, and flavors 5-8 from
P3 via an adapter.
2. When the touch screen operates two pieces of equipment that
are connected to only one spout, the draw switch and
injector/blender should be operated from the P2 connector.
26590
Next Back
Pre-Setup Verification-2
The following rules MUST be followed
for the touch screen to operate properly.
3. When the touch screen operates two spouts:
- P2 runs the draw switch and injector for Spout A
- P3 runs the draw switch and injector for Spout B
Press Next to Continue
26575
7. Press the NEXT key.
Next
26592
8. Press the SETUP SECOND UNIT key.
Back Done
Type of Equipment
Initial Unit Setup
Powered by the P2 Cable Connector
None
None
Flavor/
Mixin A B
Spout
1 - 4
5 - 8
Setup Second Unit
(Powered by the P3
Cable Connector)
26491
9. On the “Initial Unit Setup Powered by the
P3
Cable Connector” screen, ensure all
four of the boxes to the left are unchecked.
If there is a check mark in a box, press it to
deselect it. The “Type of Equipment” boxes
should both read “None” when the boxes
are clear.
Back Done
Type of Equipment
Initial Unit Setup
Powered by the P3 Cable Connector
None
None
Flavor/
Mixin A B
Spout
1 - 4
5 - 8
26492
10. Press the BACK key.
Back
26509