[email protected]
whatsapp:959440045
6
Dismantling & Assembly
6.1
Inlet/outlet and bowl
11. Lift out the top disc, the bowl discs with wing
insert and the distributor. Screw the nut of the
compression tool up against the eye bolt, turn
the unit with the tool still attached upside down
and hit it against a firm base. This will facilitate
loosening of the top disc.
G0357521
12. Lift out sliding bowl bottom (21) using the special
tool. Ease the sliding bowl bottom off with the
central screw of the tool. If necessary, knock
on the handle.
G0072031
13. Unscrew cap nut (22).
Left-hand thread!
14. Remove upper distributing ring (23) using the
special tool. Detach the distributing ring either:
-
by jerking, or
-
by tightening the nuts equally
G0070631
85
www.fdm.com.pe