[email protected]
whatsapp:959440045
6
Dismantling & Assembly
References to check points
In the text you will find references to the
check point instructions in chapter
. The references appear
in the text as in the following example:
Check point
. In this example, look up check point
Disc stack pressure for further instructions.
Switch off and lock power supply before starting
any dismantling work.
Tools
Special tools from the tool kit must be used for
dismantling and assembly. The special tools are
specified in the Spare Parts Catalogue.
Additional tools needed for dismantling but not
included in the tool kit are shown here.
For bowl and bowl spindle
1. Screwdriver
2. Torque wrench (50 Nm) with socket 16 mm
3. Pliers for internal snap ring
4. Ball bearing puller
5. Screw vice with copper liners
6. Adjustable wrench, length approx. 400 mm
7. Adjustable wrench or spanner, width of jaws
24 mm
Two lifting slings, working load limit (WLL): >300
kg are also needed.
G0278821
75
www.fdm.com.pe