FDM P 605, Manual, Page: 34 / 181

ventas@fdm.com.pe
fdmsac@gmail.com
whatsapp:959440045
5.2 Maintenance Logs 5 Service instructions
5.2 Maintenance Logs
5.2.1 Daily checks
The following steps should be carried out daily.
Main component and activity Part Page Notes
Inlet and outlet
Check for leakage Connecting housing
Separator bowl
Check for vibration and noise
Belt transmission
Check for vibration and noise
Oil sump
Check Oil level
Electrical motor
Check for vibration, heat and noise
See manufacturer’s instructions
5.2.2 Oil change - monthly
The oil change and check of belt transmission
should be carried out every 1500 hours of
operation.
When using a group D oil, time of operation
between oil changes can be extended from the
normal 1500 hours to 2000 hours.
When the separator is run for short periods,
the lubricating oil must be changed every 12
months even if the total number of operating
hours is less than 1500 hours (less than 2000
hours if a group D oil is used).
See chapter 5.9 Lubricants on page 59 for
further information on oil brands etc.
Main component and activity Part Page Notes
Bowl spindle and transmission
Check
Belt tension 122
Change Oil in oil sump
57
34
www.fdm.com.pe