[email protected]
whatsapp:959440045
6.1
Inlet/outlet and bowl
6
Dismantling & Assembly
6.1.1
Inlet/outlet and bowl - dismantling
The frame hood and the heavy bowl parts must
be lifted by means of a hoist. Position the hoist
exactly above the bowl centre. Use an endless
sling and a lifting hook with catch.
The parts must be handled carefully. Don’t
place parts directly on the floor, but on a clean
rubber mat, fibreboard or a suitable pallet.
!
WARN
ING
Entrapment hazard
To avoid accidental start, switch off and lock power
supply before starting
any
dismantling work.
1.
Remove safety device and look through the slot
in the frame hood to see if the bowl still rotates.
!
WARN
ING
Entrapment hazard
Make sure that rotating parts have come to a complete
standstill before starting any dismantling work.
The bowl parts can remain very hot for a
considerable time after the bowl has come to
a standstill.
G0819751
G0467361
82
www.fdm.com.pe