[email protected]
whatsapp:959440045
5
Service instructions
5.7
Cleaning
5.7
Cleaning
External cleaning
The external cleaning of frame and motor should
be restricted to brushing, sponging or wiping
while the motor is running or is still hot.
Never wash down a separator with a direct
water stream. Totally enclosed motors can be
damaged by direct hosing to the same extent
as open motors and even more than those,
because:
•
Many operators believe that these motors are
sealed, and normally they are not.
•
A water jet played on these motors will produce
an internal vacuum, which will suck the water
between the metal-to-metal contact surfaces
into the windings, and this water cannot escape.
•
Water directed on a hot motor may cause
condensation resulting in short-circuiting and
internal corrosion.
Be careful even when the motor is equipped
with a protecting hood. Never play a water jet
on the ventilation grill of the hood.
G0615361
Use a brush and a sponge or cloth when
cleaning.
G0613661
Never wash down a separator with a direct water
stream or spray.
53
www.fdm.com.pe