[email protected]
whatsapp:959440045
5.7
Cleaning
5
Service instructions
5.7.2
Cleaning of bowl discs
Handle the bowl discs carefully to avoid damage
to the surfaces during cleaning.
!
CAUTI
ON
Cut hazard
Sharp edges on the separator discs may cause cuts.
NOTE
Mechanical cleaning is likely to scratch the disc
surfaces causing deposits to form quicker and adhere
more firmly.
A gentle chemical cleaning is therefore preferable to
mechanical cleaning.
1.
Remove the bowl discs from the distributor and
lay them down,
one by one
, in the cleaning
agent.
g0065831
Put the discs one by one
into the cleaning agent
2.
Let the discs remain in the cleaning agent until
the deposits have been dissolved. This will
normally take between two and four hours.
3.
Finally clean the discs with a
soft
brush.
g0065841
Clean the discs with a soft brush
56
www.fdm.com.pe