[email protected]
whatsapp:959440045
6.3
Friction coupling
6
Dismantling & Assembly
6.3.1
Friction coupling - dismantling
1.
Check that the belt tightener is in backward
position.
2.
Remove the motor adapter screws.
3.
Remove the water tank and the flat belt.
Note that the tank must be lowered past spindle
end (A) before it can be withdrawn (B).
4.
Remove the flat belt.
G0113391
5.
Remove the electric motor complete with the
friction coupling and motor adapter. Weight of
motor including adapter and friction coupling is
not more than 35 kg.
G0077331
6.
Remove snap ring (9), cover (8) and friction
elements (7).
If the friction elements are worn, fit new ones.
Replace all friction elements even if only one
is worn.
If the friction elements are only greasy: Clean
the friction elements and the inside of belt pulley
(5) with a degreasing agent.
G0170841
116
www.fdm.com.pe