[email protected]
whatsapp:959440045
8.5
Start after a service
8
Operating
8.5.2
Starting and running-up
procedure
1.
Open the water supply valve(s). Make sure that
the water supply is on 150-600 kPa (1,5-6 bar).
0
1
2
3
4
5
6
7
8
9
10
Water supply
2.
Start the separator.
3.
Be alert for unusual noises and conditions.
4.
Note the normal occurrence of critical speed
periods. Some vibrations occur for short periods
during the starting cycle, when the separator
passes through its critical speeds. This is
normal and passes over without danger. Try to
learn the vibration characteristics of the critical
speed pattern.
!
WARN
ING
Disintegration hazards
When excessive vibration occurs, keep bowl filled
and stop separator. The cause of the vibration must
be identified and rectified before the separator is
restarted. Excessive vibration may be due to incorrect
assembly or insufficient cleaning of the bowl.
176
www.fdm.com.pe