[email protected]
whatsapp:959440045
6
Dismantling & Assembly
6.5
Oil filling device
6.5
Oil filling device
6.5.1
Dismantling/assembly
Drain off the oil, see
5.8 Oil change on page 57
.
1.
Unscrew nipple (4) and pull off the oil filling
device. Then unbend the round safety wire (6)
and pull off nipple (4).
2.
If plate (8) is to be replaced, wipe the sight glass
(7) with a degreasing agent.
3.
Fit the new plate on the outside of the sight
glass. The plate is self-adhesive.
4.
Mark the position of the plate relative to the
recess in sleeve (1).
5.
Assemble the oil filling device and fit it into the
frame. Note that the mark on sleeve (1) must be
positioned opposite the mark on the frame. Fill
the sump with new oil.
G0155811
G0155911
1. Sleeve for oil filling
2. O-ring, Silicone grease (thin layer)
3. O-ring, Silicone grease (thin layer)
4. Nipple
5. Sealing ring
6. Round safety wire
7. Sight glass
8. Plate
127
www.fdm.com.pe