[email protected]
whatsapp:959440045
8.5
Start after a service
8
Operating
8.5
Start after a service
Pay special attention to unusual conditions
when starting the separator after a service.
8.5.1
Before normal start
Check these points before every start.
1.
Make sure that the bowl is clean and that the
separator is properly assembled.
2.
Make sure that the bolts of the outlet cover and
the frame hood are fully tightened.
G0465431
Check assembly and tightenings
3.
Make sure that all couplings and connections
are securely tightened to prevent leakage.
NOTE
Slip hazard
Check all connections for leakage.
Oil leakage may make the floor slippery.
Check for leakages (not admitted)
4.
Make sure that the inlet pipe is tightened.
174
www.fdm.com.pe