[email protected]
whatsapp:959440045
6.3
Friction coupling
6
Dismantling & Assembly
4.
Wipe clean the motor shaft and apply a thin
oil film on it. Fit the special mounting and
dismantling tool to the motor shaft (by means
of the small screw on one end of the tool) and
press the friction coupling onto the shaft.
G0171051
A. Oil
B. Mounting tool
Molykote 1000 Paste (thin layer to be rubbed into
surface)
5.
Fit the screw (12) with the washer (11) and
spring washer (10) to secure the friction
coupling.
G0170921
Assembly of friction elements
1.
Fit new friction elements (7), cover (8) and snap
ring (9).
-
A coupling with two friction elements is used for
60 Hz installations.
-
A coupling with four friction elements is used
for 50 Hz installations.
G0170831
120
www.fdm.com.pe