Fayat Dynapac F80W, Operating Manual

Page: 89 / 198

83 F80W
8
14
10
451069
1
15
11
12
D451686
48
25
27
451064E
4
451071A
OPERATING MANUAL
2.5.10 Travel and reversing of the machine
The machine may be operated in the transport or operating
mode. The transport or operating mode are set by the switch of
the transport and operating mode (15).
The travel of the machine backwards is only possible in the
transport mode.
Travel of the machine in the transport mode:
• Check that the emergency switch (1) is not activated.
• Turn the transport and operating mode switch to the trans-
port mode position (rabbit).
• Switch over the key in the ignition box (11) to the position
“1”.
• Use the horn (12) to signal that the engine is starting.
• Start the engine using the ignition box (11).
• Travel control in the neutral position. The indicator lamp (25)
lights on the display.
• Using the engine speed adjusting controller (10), set the
maximum engine speed.
• Pull the arresting ring of the travel controller (8) up and
move the travel controller forward.
• The indicator lamp (25) lights on the display.
• To travel the machine backwards, operate the foot switch
(48); the travel control is in the neutral position, the indicator
lamp (27) will light up, then pull up the arresting ring of the
travel control (8) and move the travel control backwards.
• The indicator lamp (27) lights on the display and the indica-
tor lamp (25) will go out.
• An acoustic signals is emitted by the reversing horn when
the machine travels backwards.
• The maximum travel speed forward and backward is
2.5 km/h (1.55 MPH).
• During the travel the front wheel turning angle indicator (4)
checks the turning angle.
Travel of the machine in the operating mode:
• Check that the emergency switch (1) is not activated.
• Switch over the transport and operating mode switch (15)
to the operating mode position (turtle).
• Set the required speed using the paving speed selector (14),
• Switch over the key in the ignition box (11) to the position
“1”.
• Use the horn (12) to signal that the engine is starting.
• Start the engine using the ignition box (11).
• Travel control in the neutral position. The indicator lamp (25)
lights on the display.
• Using the engine speed adjusting controller (10), set the
maximum engine speed.
• Pull up the arresting ring of the travel control (8) and move
the travel control forward.
• The maximum travel speed forward is 0.6 km/h (0.37 MPH).
• The machine backward travel function cannot be activated
in the operating mode.
• During the travel the front wheel turning angle indicator (4)
checks the turning angle.