Fayat Dynapac F80W, Operating Manual

Page: 36 / 198

30 F80W
2.1.2 Assurance of safety precautions by the
owner
He must ensure that the machine is operated only under con-
ditions and only for purposes it is technically capable for ac-
cording to conditions set by the manufacturer and respective
standards.
He must ensure that the machine is used only in such a way and
at such workplaces where there is no dangerous vibration trans-
mission and damage to nearby buildings or property possible.
He must ensure a regular inspection of operation and techni-
cal conditions, regular maintenance of the machine in intervals
specified in this Operating Manual. If the technical condition
of the machine does not meet requirements to such an extent
that it endangers safety of operation, persons and property, or
damages and impairs the environment, the machine must be
put out of service until the defects are removed.
He must specify who is allowed to carry out operation, mainte-
nance and repairs of the machine as well as what activities can
be carried out during the operation, maintenance and repair of
the machine.
He must ensure that periodic safety tests are carried out in time.
Every person who drives the machine, performs maintenance
and service of the machine must be familiarised with instruc-
tions stipulated in this Operating Manual.
He must ensure that the machine is equipped with a fire extin-
guisher and it is checked on regular basis.
He must ensure that the machine is equipped with a first aid
kit at the place defined for it according to respective national
regulations.
He must ensure that the Operating Manual and the service book
are kept in the machine at a specified place to be available to
the driver all the time.
He must ensure continuous supervision by an appointed per-
son during machine operation on public roads, and give instruc-
tions to ensure health protection and work safety.
He must ensure that hazardous materials, e.g. fuels, oils, cool-
ants, will be removed from leakage points depending on their
nature so as to avoid their adverse impact on the environment,
safety of operation and human health.
He must ensure and hand over to respective authorised workers
any and all information for the safe use of electric installations
and electronic equipment of the machine, always in compliance
with respective national regulations.
He must ensure and hand over to respective authorised work-
ers any and all information for the safe use and handling of gas
bottles if they form part of the equipment, during the operation
of the machine, always in compliance with respective national
regulations.
2.1.1 Obligations before putting into
operation
Before starting working with the machine, the machine opera-
tor and the machine operator shall read this Operating Manual
and make themselves familiar with the operation of the ma-
chine, its control or operation and maintenance.
The machine user is liable to issue instructions for drivers and
maintenance workers that include requirements for safety of
operation when the machine is used. He must make machine
operators familiar with these instructions.
The machine provider must specify a technological procedure
that includes a working process for the specific job that specifies
among others:
• measures for works under extraordinary conditions, works
within protection zones, extreme slopes,
• precautions for any natural disaster hazards,
• requirements for the performance of works while observing
principles of safety at work according to respective valid na-
tional regulations,
• technical and organizational measures to provide for safety
of employees, workplaces and surroundings.
The machine provider must make machine operators provably
familiar with the technological procedure.
The machine user shall know exact routes of gas lines, potable
water lines, pipelines, sewerage, electric and telephone lines,
both aerial and ground, and inform about other potential ob-
stacles. These routes must be properly set out and marked by
respective authorities according to national regulations before
starting any works with the machine.
The minimum safety distance according to respective national
regulations must be kept from the overhead electric lines. There
is a danger of high voltage electrical shock.
Any damage to the utility lines must be immediately reported
to their provider, and at the same time measures must be taken
to prevent unauthorized persons from entering the dangerous
area.
2.1 Main safety precautions