Fayat Dynapac F80W, Operating Manual

Page: 154 / 198

148 F80W
1
D451125A
2
2
3
451130A
1
3.6 Lubrication and maintenance operations
Procedure for lubrication of the paving width setting mech-
anism:
• The procedure is identical for the left and right side of the
screed.
• Set the maximum paving width on both screed sides.
• Remove lubricating grease residues and dust from the
screed extension guide (1).
• Apply the lubricating grease on the screed extension guide
(1).
• Dismount the protective covers and clean the grease nip-
ples (2) on the linear hydraulic motors (3).
• Connect the grease gun to the grease nipples.
• Lubricate the bearings until the lubricant starts to flow out.
• Mount the protective covers on the grease nipples (2) on the
linear hydraulic motors (3).
Lubricate the machine when it is parked on a flat and sol-
id surface, the engine and the battery disconnector are
off and the gas bottle is closed.
When lubricating the machine, use the prescribed pro-
tective equipment.
There is a risk of burns from the hot parts of the screed.
There is a risk of injury due to the fall of the screed.
Front wheel suspension lubrication procedure:
• Dismount the protective cover and clean the grease nipple
(1).
• Connect the grease gun to the grease nipple (1).
• Lubricate the bearing until the lubricant starts to flow out.
• Mount the protective cover on the grease nipple (1).
Lubricate the front wheel suspension when the machine
is parked on a flat and solid surface, the engine and the
battery disconnector are off and the gas bottle is closed.
When lubricating the machine, use the prescribed pro-
tective equipment.