Fayat Dynapac F80W, Operating Manual

Page: 73 / 198

67 F80W
OPERATING MANUAL
Battery charging indicator lamp (21)
It indicates that the battery charging function is in order. After
the key in the ignition box (11) is switched over to the position
“I”, the indicator lamp must light up and it must go off after the
start-up.
Engine lubrication indicator lamp (22)
The indicator lamp indicates an engine lubrication failure.
Oil pressure too low.
Parking brake indicator lamp (23)
The lighting indicator lamp indicates that the parking brake was
enabled.
Engine glowing indicator lamp (24)
It indicates the engine warming up before the cold start.
Machine travel forward released indicator
lamp (25)
The indicator lamp indicates that the machine can travel forward.
Emergency stop indicator lamp (26)
It indicates an active function of the emergency brake.
Machine travel backward released indica-
tor lamp (27)
The indicator lamp signals that the machine can travel back-
ward.
Screed gas heating indicator lamp (28)
It indicates an active function of the screed gas heating.
Hydraulics operating mode indicator lamp
(29)
It indicates blocking of material delivery, the vibration function
and screed lowering.
Screed vibration indicator lamp (30)
It indicates that the vibration function is active.
Active error indicator lamp (31)
If the indicator lamp is lit, remove the failure displayed on the
display or contact your dealer or an DYNAPAC authorised ser-
vice centre.
Error code indicator (32)
Counter of worked engine hours (33)
It shows the total time, during which the machine has been in
operation.
Battery voltage indicator (34)
It shows a battery voltage value:
Green – the battery is OK
Yellow – low battery voltage
Red – battery voltage too low